1. INSTALL REAR COIL SPRING LH

(a) Using SST, compress the coil spring.

SST: 09727-30021

(b) Fit the coil spring to the No. 2 lower arm, and jack up the No. 2 lower arm. Install the coil spring as shown in the illustration

HINT:

Align the coil spring positioning mark with the triangle on the vehicle body frame as shown in the illustration.

(c) Confirm that the ID mark on the rear coil spring is visible through the drain hole of the No. 2 lower arm.

(d) Remove the SST from the coil spring.

3. INSTALL REAR SHOCK ABSORBER ASSEMBLY LH

4. INSPECT AND ADJUST REAR WHEEL ALIGNMENT